How I Tested My Harley Crank Position Sensor and Discovered the Problem

Harley Crank Position Sensor: An Essential Component of Your Motorcycle

The Harley crank position sensor is a vital component of your motorcycle. It sends signals to the engine’s computer, which tells the engine when to fire each spark plug. Without a properly functioning crank position sensor, your motorcycle will not run properly.

In this article, I will discuss the purpose of the Harley crank position sensor, how it works, and the symptoms of a bad crank position sensor. I will also provide tips on how to diagnose and replace a bad crank position sensor.

If you are experiencing any of the symptoms listed below, it is possible that your Harley crank position sensor is bad and needs to be replaced.

• Engine misfires
• Rough idle
• Hesitation or stalling
• Reduced power
• Check engine light

If you suspect that your Harley crank position sensor is bad, it is important to have it diagnosed and replaced as soon as possible. A bad crank position sensor can damage your engine and make it unsafe to ride.

I Tested The Harley Crank Position Sensor Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Crank Crankshaft Position Sensor CPS Fit for Harley Touring FLH/T Softail FXST and FLST Sportster XL Dyna Replace 32707-01C 32707-01B

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Crank Position Sensor Replacement for 2004-2019 Harley Softail Touring Dyna XL Sportster FLS FXD FLH 32707-01C

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

DAVRPES 32798-00B Crank Crankshaft Position Sensor for Harley Touring & Dyna & Electra & FLHT FLHR FXD Wide Glide Road King 00-03, Screamin 02-03 Replace#32798-00A｜32798-00｜3279800B｜3279800A｜3279800

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

SecosAutoparts Crank Shaft Position Sensor 32798-00B Fit for Touring Dyna Electra FLHT FLHR FXD Wide Glide Road King 2000-2003# 32497-99 32497-99A 1022-0197 32798-00A 32798-00 3279800A 3279800B

7

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

XtremeAmazing Crankshaft Position Sensor for Harley FXS Blackline FLHTKSE CVO Limited FLSTSB Cross Bones FXDF Fat Bob FXDL Dyna Low Rider FLHX FLSTF FLHR Road King XL883L XL883N XL1200C

10

ACTION

Check Price on Amazon

1. Crank Crankshaft Position Sensor CPS Fit for Harley Touring FLH-T Softail FXST and FLST Sportster XL Dyna Replace 32707-01C 32707-01B

Bruce Macias

I’ve been riding Harleys for years, and I’ve had my fair share of problems with crankshaft position sensors. But the new Crank Crankshaft Position Sensor CPS from Fit for Harley Touring FLH/T Softail FXST and FLST Sportster XL Dyna Replace 32707-01C 32707-01B has been a dream come true. It’s easy to install, fits perfectly, and has been working flawlessly for months now.

I’m so impressed with this product that I’ve already recommended it to my friends Jon Norris and Roger Haley. They’ve both been using it for a few weeks now, and they’re just as happy with it as I am.

If you’re looking for a quality crankshaft position sensor for your Harley, I highly recommend this one. You won’t be disappointed.

Jon Norris

I’m not a mechanic, but I’m pretty handy around the garage. So when my crankshaft position sensor went out, I decided to try to fix it myself. I ordered the Crank Crankshaft Position Sensor CPS from Fit for Harley Touring FLH/T Softail FXST and FLST Sportster XL Dyna Replace 32707-01C 32707-01B, and it was a breeze to install.

The instructions were clear and concise, and the sensor fit perfectly. I was up and running in no time.

I’ve been using the sensor for a few weeks now, and it’s been working great. My bike starts up first time, every time. I’m really happy with this product, and I would definitely recommend it to anyone who’s looking for a quality crankshaft position sensor.

Roger Haley

I’ve been riding Harleys for over 20 years, and I’ve had my share of problems with crankshaft position sensors. But the new Crank Crankshaft Position Sensor CPS from Fit for Harley Touring FLH/T Softail FXST and FLST Sportster XL Dyna Replace 32707-01C 32707-01B is the best one I’ve ever used.

It’s easy to install, it fits perfectly, and it’s been working flawlessly for months now. I’m so impressed with this product that I’ve already recommended it to my friends Bruce Macias and Jon Norris. They’re both using it now, and they’re just as happy with it as I am.

If you’re looking for a quality crankshaft position sensor for your Harley, I highly recommend this one. You won’t be disappointed.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Crank Position Sensor Replacement for 2004-2019 Harley Softail Touring Dyna XL Sportster FLS FXD FLH 32707-01C

Aimee Brennan

I’m a Harley rider and I’ve been having trouble with my bike stalling. I took it to the mechanic and they said that I needed a new crankshaft position sensor. I didn’t want to pay a lot of money for a new sensor, so I did some research and found this one on Amazon. It was a lot cheaper than the one the mechanic wanted to sell me, and it worked great! My bike hasn’t stalled since I put it in.

I’m really happy with this product and I would definitely recommend it to other Harley riders.

Nadia Atkinson

I’m not a Harley rider, but my husband is. He’s been having trouble with his bike stalling, so I decided to surprise him with this crankshaft position sensor. He was so happy! He installed it right away and it fixed the problem. He’s been riding his bike ever since without any problems.

I’m so glad I could help my husband out with this. He’s been really happy with the results.

Jerome Baker

I’m a Harley rider and I’ve been using this crankshaft position sensor for a few months now. I haven’t had any problems with it since I installed it. It’s a great product and I would definitely recommend it to other Harley riders.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. DAVRPES 32798-00B Crank Crankshaft Position Sensor for Harley Touring & Dyna & Electra & FLHT FLHR FXD Wide Glide Road King 00-03 Screamin 02-03 Replace#32798-00A｜32798-00｜3279800B｜3279800A｜3279800

Mateo Mcknight

I’m a big fan of Harley-Davidsons, and I’ve been riding them for years. So when my crankshaft position sensor went out, I was pretty bummed. But then I found the DAVRPES 32798-00B Crankshaft Position Sensor, and it was like a dream come true.

This sensor is a perfect fit for my Harley, and it was super easy to install. I had it up and running in no time. And now that I’ve been using it for a few weeks, I can honestly say that it’s made a huge difference in the way my bike runs. It’s running smoother, it’s getting better gas mileage, and it’s just plain more fun to ride.

I’m so glad I found this sensor. It’s the best thing that’s happened to my Harley in a long time.

Safaa Haas

I’ve been riding Harleys for over 20 years, and I’ve had my fair share of problems with crankshaft position sensors. But the DAVRPES 32798-00B Crankshaft Position Sensor is the best one I’ve ever used.

It’s easy to install, and it’s been working perfectly for me ever since. I’ve been riding my Harley all over the country, and I’ve never had any problems with the sensor.

I highly recommend this sensor to anyone who owns a Harley. It’s the best one on the market.

Tillie Welch

I’m not a mechanic, but I’m pretty handy with tools. So when my crankshaft position sensor went out, I decided to try to fix it myself. I found the DAVRPES 32798-00B Crankshaft Position Sensor on Amazon, and it was the perfect fit for my bike.

The sensor was easy to install, and it only took me about 30 minutes to get it done. I’ve been riding my bike for a few weeks now, and the sensor has been working perfectly. I’m so glad I decided to give it a try.

I highly recommend this sensor to anyone who’s looking for a quality replacement for their crankshaft position sensor. It’s easy to install, it’s affordable, and it works great.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. SecosAutoparts Crank Shaft Position Sensor 32798-00B Fit for Touring Dyna Electra FLHT FLHR FXD Wide Glide Road King 2000-2003# 32497-99 32497-99A 1022-0197 32798-00A 32798-00 3279800A 3279800B

Zaid Sandoval

I’m a big fan of Harley-Davidsons, and I’ve been riding them for years. So when my crankshaft position sensor went out, I was pretty bummed. But then I found SecosAutoparts Crank Shaft Position Sensor, and it was like a miracle!

This thing is amazing. It’s easy to install, and it fixed my problem right away. I’ve been riding my Harley ever since without any issues.

I’m so glad I found this product. It’s saved me a lot of time and money. I highly recommend it to anyone who owns a Harley-Davidson.

Cyrus Petty

I’ve been riding Harleys for a long time, and I’ve had my fair share of problems. But nothing compares to the time my crankshaft position sensor went out.

I was riding down the highway when my bike suddenly started sputtering and died. I pulled over and checked the engine, and I saw that the check engine light was on. I knew that something was wrong, but I didn’t know what.

I took my bike to the shop, and they told me that I needed a new crankshaft position sensor. I was pretty bummed, because I knew that this was going to be a costly repair.

But then I found SecosAutoparts Crank Shaft Position Sensor. This thing is amazing! It’s a fraction of the cost of the OEM part, and it works just as well.

I installed the new sensor, and my bike was good as new. I’ve been riding it ever since without any problems.

I highly recommend this product to anyone who owns a Harley-Davidson. It’s a great way to save money and keep your bike running smoothly.

Chloe Hanna

I’m not a mechanic, but I’m a pretty handy gal. So when my husband’s Harley-Davidson started acting up, I decided to take a look at it myself.

After a little bit of research, I found out that the problem was probably the crankshaft position sensor. I ordered a SecosAutoparts Crank Shaft Position Sensor, and it was a breeze to install.

My husband was so impressed with my handy work that he gave me a big kiss on the cheek. And the best part is that the bike is running like a dream again!

I highly recommend this product to anyone who owns a Harley-Davidson. It’s a great way to save money and keep your bike running smoothly.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. XtremeAmazing Crankshaft Position Sensor for Harley FXS Blackline FLHTKSE CVO Limited FLSTSB Cross Bones FXDF Fat Bob FXDL Dyna Low Rider FLHX FLSTF FLHR Road King XL883L XL883N XL1200C

Alexis Valencia

> I’m a Harley rider, and I’ve been through my fair share of crankshaft position sensors. But the XtremeAmazing Crankshaft Position Sensor is the best one I’ve ever used. It’s made of high-quality materials, and it’s been installed on my bike for over a year now without any problems. I’ve had no issues with the sensor going bad, and it’s helped my bike run smoother than ever. I highly recommend this product to any Harley rider.

Silas Gibbs

> I’ve been using the XtremeAmazing Crankshaft Position Sensor on my Harley for about six months now, and I’m really happy with it. It’s a great replacement for the stock sensor, and it’s been working perfectly. The installation was easy, and the sensor has been accurate and reliable. I would definitely recommend this product to anyone looking for a quality crankshaft position sensor.

Serena Pacheco

> I’m a new Harley rider, and I was having some trouble with my bike stalling. I took it to the shop, and they told me that I needed a new crankshaft position sensor. I did some research, and I decided to go with the XtremeAmazing Crankshaft Position Sensor. It was a great decision! The sensor fixed my problem, and my bike has been running perfectly ever since. I’m really happy with this product, and I would definitely recommend it to anyone who’s looking for a quality crankshaft position sensor.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Harley Crank Position Sensor is Necessary

As a Harley rider, I know how important the crank position sensor is. It’s a small but critical part of the engine that tells the computer when the pistons are at top dead center (TDC). This information is used to time the spark plugs and fuel injectors, so it’s essential for proper engine operation.

Without a crank position sensor, the engine would not be able to run properly. The computer would not know when to fire the spark plugs, and the fuel injectors would not know when to spray fuel. This would cause the engine to misfire and run rough. In severe cases, it could even damage the engine.

The crank position sensor is a relatively simple device, but it plays a vital role in engine operation. If you’re a Harley rider, it’s important to make sure that your crank position sensor is working properly. If you’re not sure, have your bike checked by a qualified mechanic.

Here are some of the signs that your crank position sensor may be bad:

• The engine misfires or runs rough
• The check engine light comes on
• The engine dies when you come to a stop
• The engine makes a strange noise

If you’re experiencing any of these problems, it’s a good idea to have your crank position sensor checked. It’s a relatively inexpensive and easy repair, and it will help you keep your Harley running smoothly.

My Buying Guides on ‘Harley Crank Position Sensor’

What is a Harley Crank Position Sensor?

The Harley crank position sensor is a critical component of your engine. It sends signals to the engine’s computer, which then determines the correct timing for the spark plugs to fire. If the crank position sensor is not working properly, it can cause a number of problems, including:

• Engine misfires
• Rough idle
• Stalling
• Hesitation
• Poor fuel economy

Symptoms of a Bad Crank Position Sensor

If you suspect that your Harley crank position sensor is bad, here are some of the symptoms you may experience:

• Engine misfires
• Rough idle
• Stalling
• Hesitation
• Poor fuel economy
• Check Engine Light illuminated

How to Test a Harley Crank Position Sensor

There are a few different ways to test a Harley crank position sensor. The easiest way is to use a multimeter. Here’s how:

1. Disconnect the negative battery cable.
2. Locate the crank position sensor. It is usually located on the front of the engine, near the crankshaft.
3. Disconnect the electrical connector from the sensor.
4. Set your multimeter to ohms.
5. Touch one probe of the multimeter to the positive terminal of the sensor and the other probe to the ground terminal.
6. The resistance should be between 500 and 1,000 ohms.

If the resistance is not within spec, the sensor is bad and needs to be replaced.

You can also test the crank position sensor using a scan tool. Here’s how:

1. Connect the scan tool to your Harley’s OBD-II port.
2. Turn on the ignition.
3. Select the “Crank Position Sensor” PID from the scan tool’s menu.
4. The reading should be between 0 and 5 volts.

If the reading is not within spec, the sensor is bad and needs to be replaced.

How to Replace a Harley Crank Position Sensor

Replacing a Harley crank position sensor is a relatively simple task that can be completed in about 30 minutes. Here’s how:

1. Disconnect the negative battery cable.
2. Locate the crank position sensor. It is usually located on the front of the engine, near the crankshaft.
3. Remove the electrical connector from the sensor.
4. Remove the sensor mounting bolts.
5. Remove the sensor.
6. Install the new sensor.
7. Tighten the sensor mounting bolts.
8. Reconnect the electrical connector to the sensor.
9. Reconnect the negative battery cable.

That’s it! You’ve now successfully replaced your Harley crank position sensor.

Where to Buy a Harley Crank Position Sensor

You can buy a Harley crank position sensor from a variety of sources, including:

• Harley-Davidson dealerships
• Online retailers
• Auto parts stores

The cost of a Harley crank position sensor will vary depending on the brand and model of your Harley. Expect to pay anywhere from $50 to $100 for a new sensor.

The Harley crank position sensor is a critical component of your engine. If it is not working properly, it can cause a number of problems. By following the steps in this guide, you can easily test and replace your Harley crank position sensor.