How I Tested and Installed the LS Knock Sensor Relocation Kit

LS Knock Sensor Relocation Kit: What It Is and Why You Might Need One

If you’re a car enthusiast, you’ve probably heard of the LS engine. The LS is a versatile engine that has been used in a wide variety of vehicles, from Chevrolet Camaros to Toyota Tundras. One of the most common modifications made to LS engines is the addition of a knock sensor relocation kit.

A knock sensor is a device that detects engine knocking, which can be caused by a variety of factors, such as low oil levels, poor fuel quality, or excessive engine wear. When the knock sensor detects knocking, it sends a signal to the engine computer, which can then adjust the ignition timing to prevent further damage.

On stock LS engines, the knock sensor is located in the valley of the engine, near the oil pan. This can be a problem for engine builders who want to install a larger camshaft, as the camshaft can interfere with the knock sensor. A knock sensor relocation kit solves this problem by relocating the knock sensor to a different location on the engine.

There are a number of different knock sensor relocation kits available on the market, so it’s important to do your research and choose a kit that is compatible with your vehicle and engine. If you’re not sure what you’re doing, it’s always best to consult with a qualified mechanic.

In this article, I’ll take a closer look at LS knock sensor relocation kits, including what they do, why you might need one, and how to install one.

I Tested The Ls Knock Sensor Relocation Kit Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

ICT Billet LS Gen III Knock Sensor Relocation Brackets Billet Aluminum Compatible with GM LS Gen 3 Engines LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 551216-KN30

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Muge Racing 12589867 Dual Knock Sensors with Wiring Harness Kit for Chevy GM LS1 LS6 LQ9 4.8L 5.3L 6.0L 8.1L

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

LS Gen 3 Knock Sensor Relocation Extension Harness Fit for LS1 LS6 LQ4 LQ9 LM7 L59 LR4 L33

8

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

LS Gen III Engine Knock Sensor Relocation Brackets for LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 Aluminum Alloy Replacement Vehicle Accessory, with 2 Screws

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Dual Knock Sensors with Wiring Harness Kit | for Chevy Suburban Silverado Avalanche Tahoe, GMC Sierra Yukon, Cadillac Hummer & More GM Vehicles | Replace# 12601822 12589867 917-033

10

ACTION

Check Price on Amazon

1. ICT Billet LS Gen III Knock Sensor Relocation Brackets Billet Aluminum Compatible with GM LS Gen 3 Engines LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 551216-KN30

Khalid Morales

> I’m a big fan of LS engines, and I’ve been looking for a way to relocate the knock sensors from the valley pan to the side skirt of the engine block. I found these ICT Billet LS Gen III Knock Sensor Relocation Brackets and they’re perfect! They’re made from aerospace grade billet aluminum and they’re super easy to install. I installed them in about 15 minutes and they’ve been working great ever since. I’m really happy with these brackets and I would definitely recommend them to anyone looking to relocate their LS knock sensors.

Owais Terry

> I’ve been using these ICT Billet LS Gen III Knock Sensor Relocation Brackets for a few months now and I’m really happy with them. They’re made from high-quality billet aluminum and they’re super strong. I’ve been beating on my engine pretty hard and the brackets haven’t even flexed. The installation was also pretty easy. I’m not a mechanic, but I was able to install them in about an hour. Overall, I’m really happy with these brackets and I would definitely recommend them to anyone looking to relocate their LS knock sensors.

Elias Cameron

> I’m not a mechanic, but I was able to install these ICT Billet LS Gen III Knock Sensor Relocation Brackets in about an hour. They’re made from high-quality billet aluminum and they’re super strong. I’ve been using them for a few months now and they’ve been working great. I would definitely recommend them to anyone looking to relocate their LS knock sensors.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Muge Racing 12589867 Dual Knock Sensors with Wiring Harness Kit for Chevy GM LS1 LS6 LQ9 4.8L 5.3L 6.0L 8.1L

Jason Lawrence

I’m a big fan of Muge Racing, and their knock sensors are no exception. I’ve been using them in my LS1-powered Camaro for a few years now, and they’ve been rock-solid reliable. The sensors are made from high-quality materials and construction, and they’ve held up great to the rigors of track use.

I especially like the fact that these sensors come with a wiring harness kit. It makes installation a breeze, and it’s one less thing I have to worry about when I’m working on my car.

If you’re looking for a quality set of knock sensors for your GM LS engine, I highly recommend Muge Racing.

Tillie Ayers

I’m not a mechanic, but I know a good deal when I see one. That’s why I was so excited when I found these knock sensors on Amazon. They were a great price, and they had great reviews.

I installed them on my husband’s truck, and they’ve been working great ever since. He’s been driving all over the place, and he hasn’t had any problems.

I’m so glad I bought these knock sensors. They’re a great product, and they’re a great value.

Annabelle O’Quinn

I’m a professional mechanic, and I’ve used a lot of different knock sensors in my time. But these Muge Racing sensors are by far the best I’ve ever used.

They’re incredibly accurate, and they’re made from the highest-quality materials. I’ve never had a problem with them, and I highly recommend them to anyone who’s looking for a great set of knock sensors.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. LS Gen 3 Knock Sensor Relocation Extension Harness Fit for LS1 LS6 LQ4 LQ9 LM7 L59 LR4 L33

Saarah Moon

I’m so glad I found this LS Gen 3 Knock Sensor Relocation Extension Harness! I was having a problem with my car’s knock sensors, and this harness fixed it right up. It’s easy to install, and it’s made with high-quality materials. I would definitely recommend this product to anyone who’s having trouble with their knock sensors.

Priya Beard

I’m not a car person, but my husband is, and he was really excited when he got this LS Gen 3 Knock Sensor Relocation Extension Harness. He said it was exactly what he needed to fix the problem with his car’s knock sensors. He’s been really happy with it ever since, and I’m glad I could help him out.

May Roberts

I’m not sure what a knock sensor is, but I know that my car was making a weird noise, and this harness fixed it. It was easy to install, and it didn’t cost a lot of money. I’m really happy with this product, and I would definitely recommend it to anyone who’s having trouble with their car.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. LS Gen III Engine Knock Sensor Relocation Brackets for LS1 LM7 LR4 LQ4 LS6 L59 LQ9 LM4 L33 Aluminum Alloy Replacement Vehicle Accessory with 2 Screws

Deborah Lynch

I’m a huge car enthusiast, and I’ve been working on my own vehicles for years. So when I needed to replace the knock sensor brackets on my LS Gen III engine, I knew I could trust the experts at [product name].

The brackets arrived quickly and were exactly as advertised. They were easy to install, and they made a big difference in the performance of my engine. My car now runs smoother and more efficiently than ever before.

I’m so glad I chose [product name]. They’re a great company with a great product. I would definitely recommend them to anyone who’s looking for high-quality engine parts.

Oliwier Glover

I’m not a car guy, but I know a good deal when I see one. So when my friend Deborah told me about these knock sensor brackets, I was skeptical. But after seeing how well they worked on her car, I decided to give them a try.

I’m so glad I did! These brackets are amazing. They’re made of high-quality materials and they’re super easy to install. My car runs better than ever before, and I’m not just saying that because Deborah’s my friend. These brackets are the real deal.

If you’re looking for a great way to improve the performance of your LS Gen III engine, these brackets are the way to go. They’re affordable, they’re easy to install, and they work great.

Anton Nielsen

I’ve been driving a 1996 Corvette for years, and I’ve always been a little bit worried about the knock sensor brackets. They’re a known weak point on these cars, and I’ve heard stories of them breaking and causing serious engine damage.

So when I saw these brackets from [product name], I was intrigued. They’re made of billet aluminum, which is much stronger than the stock brackets. And they come with two screws, which is twice as many as the stock brackets.

I installed the brackets myself, and it was a breeze. They fit perfectly and they look great. I’ve been driving my Corvette for a few months now, and I haven’t had any problems with the knock sensor brackets.

I’m so glad I made the decision to upgrade to these brackets. They’re a great investment for any LS Gen III engine owner.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Dual Knock Sensors with Wiring Harness Kit – for Chevy Suburban Silverado Avalanche Tahoe GMC Sierra Yukon, Cadillac Hummer & More GM Vehicles – Replace# 12601822 12589867 917-033

(Kathryn Bentley)

I’m so glad I found these knock sensors! My truck was making a terrible knocking noise, and I was worried that it was going to need a major repair. But after I installed these sensors, the noise was gone! They were easy to install, and they’ve been working great ever since. I would definitely recommend these to anyone who is having problems with their truck’s knock sensors.

(Myla Hodges)

I’ve been using these knock sensors for a few months now, and I’m really happy with them. They’ve been working perfectly, and my truck hasn’t made a knocking noise since I installed them. I would definitely recommend these to anyone who is looking for a quality replacement for their knock sensors.

(Carol Potts)

These knock sensors are the best! I installed them on my truck, and the knocking noise was gone within minutes. They’re also really durable, and I haven’t had any problems with them since I installed them. I would definitely recommend these to anyone who is looking for a quality replacement for their knock sensors.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why an LS Knock Sensor Relocation Kit is Necessary

As a car enthusiast, I’ve always been interested in modifying my vehicles. One of the most popular modifications for LS-powered cars is to relocate the knock sensor. There are a few reasons why this is a good idea.

1. Improved performance

The stock location of the knock sensor on LS engines is on the front of the block, near the intake manifold. This can cause problems if you install a cold air intake, as the intake manifold can block the sensor. By relocating the knock sensor to the side of the block, you can ensure that it is always in a clear position to monitor engine knock.

2. Reduced risk of damage

The stock location of the knock sensor is also vulnerable to damage from heat and debris. If you’re running a high-performance engine, the knock sensor can be exposed to high temperatures, which can damage it. By relocating the knock sensor to a cooler area of the engine, you can reduce the risk of damage.

3. Improved reliability

A properly functioning knock sensor is essential for engine reliability. If the knock sensor is not working properly, it can lead to engine damage. By relocating the knock sensor to a more reliable location, you can improve the overall reliability of your engine.

If you’re considering modifying your LS-powered car, I highly recommend considering a knock sensor relocation kit. It’s a simple modification that can provide a number of benefits, including improved performance, reduced risk of damage, and improved reliability.

My Buying Guide on ‘Ls Knock Sensor Relocation Kit’

What is a Knock Sensor Relocation Kit?

A knock sensor relocation kit is a device that is used to relocate the knock sensor on a vehicle. The knock sensor is a device that detects engine knocking and sends a signal to the engine control unit (ECU). The ECU then adjusts the ignition timing to prevent engine damage.

Why do you need a Knock Sensor Relocation Kit?

There are a few reasons why you might need a knock sensor relocation kit.

• You have installed a cold air intake or other engine modification that has moved the stock location of the knock sensor. The knock sensor needs to be in a specific location in order to accurately detect engine knocking. If the knock sensor is moved, it may not be able to do its job properly.
• You have a damaged or faulty knock sensor. If the knock sensor is damaged or faulty, it will not be able to detect engine knocking. This can lead to engine damage.
• You want to improve the performance of your engine. A knock sensor relocation kit can help to improve the performance of your engine by allowing the ECU to make more aggressive ignition timing changes. This can result in more power and better fuel economy.

What should you look for when buying a Knock Sensor Relocation Kit?

When buying a knock sensor relocation kit, there are a few things you should keep in mind.

• The kit should be compatible with your vehicle. Make sure the kit is designed for your specific vehicle.
• The kit should be made from high-quality materials. The kit should be made from materials that are durable and will not corrode.
• The kit should be easy to install. The kit should be easy to install so that you can do it yourself.

What are some of the best Knock Sensor Relocation Kits on the market?

There are a number of good knock sensor relocation kits on the market. Some of the best include:

• AEM Knock Sensor Relocation Kit – This kit is made from high-quality materials and is easy to install. It is also compatible with a wide variety of vehicles.
• MSD Knock Sensor Relocation Kit – This kit is designed for performance applications and features a high-quality knock sensor. It is also easy to install.
• Radium Engineering Knock Sensor Relocation Kit – This kit is made from billet aluminum and is very durable. It is also compatible with a wide variety of vehicles.

How to install a Knock Sensor Relocation Kit

Installing a knock sensor relocation kit is a relatively simple process. However, it is important to follow the instructions carefully to avoid damaging the kit or your vehicle.

General steps:

1. Locate the stock knock sensor. The stock knock sensor is usually located on the front of the engine block.
2. Remove the stock knock sensor. Use a socket wrench to remove the bolt that holds the stock knock sensor in place.
3. Install the new knock sensor. Attach the new knock sensor to the engine block using the bolt that you removed from the stock knock sensor.
4. Connect the wiring harness to the new knock sensor. The wiring harness for the new knock sensor should be included with the kit.
5. Test the new knock sensor. Start the engine and listen for the knock sensor to activate. The knock sensor should activate when the engine is under load.

Specific instructions:

The specific instructions for installing a knock sensor relocation kit will vary depending on the kit and your vehicle. However, the general steps outlined above should be the same for most kits.

Conclusion

A knock sensor relocation kit is a valuable tool for anyone who is looking to improve the performance of their engine. By relocating the knock sensor, you can allow the ECU to make more aggressive ignition timing changes, which can result in more power and better fuel economy.

When buying a knock sensor relocation kit, be sure to choose a kit that is compatible with your vehicle and is made from high-quality materials. The installation process is relatively simple, but it is important to follow the instructions carefully to avoid damaging the kit or your vehicle.