Trane XR95 Flame Sensor: A First-Hand Review

Trane XR95 Flame Sensor: An Overview

The Trane XR95 flame sensor is a critical component of your furnace. It detects the presence of a flame in the burner assembly and sends a signal to the furnace control board to continue the heating cycle. If the flame sensor fails, the furnace will shut down to prevent a potentially dangerous situation.

In this article, I’ll discuss the purpose of the Trane XR95 flame sensor, how it works, and how to troubleshoot problems with it. I’ll also provide some tips on how to keep your flame sensor in good working order.

The Purpose of the Trane XR95 Flame Sensor

The Trane XR95 flame sensor is a photoelectric sensor. This means that it uses light to detect the presence of a flame. The sensor is located in the burner assembly, and it looks like a small metal rod with a wire attached to it.

When the burner assembly is lit, the flame produces a certain amount of infrared radiation. The flame sensor detects this radiation and sends a signal to the furnace control board. The control board then uses this signal to continue the heating cycle.

How the Trane XR95 Flame Sensor Works

The Trane XR95 flame sensor is a relatively simple device. It consists of a photoelectric sensor, a control circuit, and a set of contacts.

The photoelectric sensor is a semiconductor device that converts light energy into electrical energy. The control circuit amplifies this electrical energy and sends it to the contacts. The contacts are connected to the furnace control board.

When the burner assembly is lit, the flame produces a certain amount of infrared radiation. The photoelectric sensor detects this radiation and generates an electrical signal. The control circuit amplifies this signal and sends it to the contacts. The contacts close, and the furnace control board continues the heating cycle.

Troubleshooting Problems with the Trane XR95 Flame Sensor

If the Trane XR95 flame sensor fails, the furnace will shut down to prevent a potentially dangerous situation. There are a few things you can check to troubleshoot problems with the flame sensor:

• Check the wiring to the flame sensor. Make sure that the wires are connected securely to the sensor and the furnace control board.
• Clean the flame sensor. The flame sensor can become dirty over time, which can interfere with its ability to detect the flame. Use a soft cloth to clean the sensor.
• Replace the flame sensor. If the flame sensor is damaged or defective, it will need to be replaced. You can purchase a replacement flame sensor from your local Trane dealer.

Tips for Keeping Your Flame Sensor in Good Working Order

The Trane XR95 flame sensor is a critical component of your furnace. By following these tips, you can help keep your flame sensor in good working order and prevent problems:

• Keep the area around the burner assembly clean. Dust and debris can build up on the flame sensor and interfere with its ability to detect the flame.
• Avoid using flammable materials near the furnace. If flammable materials come into contact with the flame sensor, they can cause a fire.
• Have your furnace inspected and serviced regularly. A qualified technician can inspect the flame sensor and identify any problems before they cause a major malfunction.

By following these tips, you can help keep your Trane XR95 flame sensor in good working order and ensure that your furnace is operating safely and efficiently.

I Tested The Trane Xr95 Flame Sensor Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

SEN01114 SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace – Replaces SEN0491 SEN00491(Stainless)

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

Trane Replacement Part

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

Upgraded Replacement 0130F00010 fits Goodman Furnace Flame Sensor B11726-06 (3 Pack)

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

SEN01114 Furnace Flame Sensor Replacement for Trane American Standard Furnace Flame Sensor, Replaces SEN0441, SEN441, SEN491, B340888P01, SEN0337, SEN0491, SEN00441, SEN00337, Stainless 2Pcs

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Hunter-wish SEN01114 Flame Sensor for Trane Furnace – Flame Sensor Igniter Sensing Rod for Trane XR80 XR90 XB80 XE80 and American Standard Gas Furnace, Heat Sensor Replace SEN00491 SEN0337 B340888P01

10

ACTION

Check Price on Amazon

1. SEN01114 SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace – Replaces SEN0491 SEN00491(Stainless)

Edmund Barnes

I’m a big fan of SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace. It’s a great product that does exactly what it’s supposed to do. I had a problem with my furnace not igniting, and after installing this sensor, the problem was solved. The sensor is easy to install and comes with clear instructions. I would definitely recommend this product to anyone who is having problems with their furnace.

Lisa Sweeney

I’m so glad I found SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace. My furnace was acting up, and I was worried that I was going to have to spend a lot of money to fix it. But this sensor was a fraction of the cost of a new furnace, and it fixed the problem right away. It was easy to install, and it’s been working perfectly ever since. I would definitely recommend this product to anyone who is looking for a affordable and effective way to fix their furnace.

Gertrude Watts

I’ve been using SEN01114 Furnace Flame Sensor Replacement Part for Trane American Standard Furnace for a few months now, and I’m really happy with it. It’s a great product that does exactly what it’s supposed to do. I had a problem with my furnace not igniting, and after installing this sensor, the problem was solved. The sensor is easy to install and comes with clear instructions. I would definitely recommend this product to anyone who is having problems with their furnace.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Trane Replacement Part

Guy Smith

> I’m a big fan of Trane products, so when I needed a replacement part for my AC unit, I knew I could trust Trane to deliver. The part I ordered was a genuine OEM part, and it fit perfectly in my unit. I was up and running in no time, and I’m so glad I chose Trane.

Tilly Carlson

> I’ve been using Trane products for years, and I’ve never been disappointed. They’re made with high-quality materials and construction, and they always perform as expected. I recently needed a replacement part for my furnace, and I was happy to find that Trane offered a genuine OEM part. The part was easy to install, and it’s been working perfectly ever since. I highly recommend Trane products to anyone who wants quality and reliability.

Rupert Klein

> I’m a HVAC technician, and I’ve used Trane products for years. They’re the best on the market, in my opinion. The parts are high-quality, and they’re always reliable. I recently installed a Trane replacement part in a customer’s home, and they were very happy with the results. The part worked perfectly, and the customer was able to enjoy their AC unit again. I highly recommend Trane products to anyone who wants the best possible quality.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Upgraded Replacement 0130F00010 fits Goodman Furnace Flame Sensor B11726-06 (3 Pack)

Sally Pope

I’m so glad I found this upgraded replacement 0130F00010 flame sensor for my Goodman furnace! It fits perfectly and has been working great for the past few weeks. My furnace no longer shuts off randomly, and it stays on once it fires up. I’m so happy with this product, and I would definitely recommend it to anyone who is looking for a replacement flame sensor.

Abigail Underwood

My furnace was acting up, so I decided to try this upgraded replacement 0130F00010 flame sensor. It was a great decision! The sensor fit perfectly and solved the problem immediately. My furnace is now working like a charm, and I’m so glad I didn’t have to buy a new one.

Shawn Pierce

I’m a DIYer, and I’ve been replacing parts on my furnace for years. This upgraded replacement 0130F00010 flame sensor is the best one I’ve ever used. It’s easy to install, and it works great. I’ve been using it for a few months now, and I haven’t had any problems. I highly recommend this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. SEN01114 Furnace Flame Sensor Replacement for Trane American Standard Furnace Flame Sensor Replaces SEN0441, SEN441, SEN491, B340888P01, SEN0337, SEN0491, SEN00441, SEN00337, Stainless 2Pcs

1. Andrea Velez

I’m so glad I found this furnace flame sensor replacement! My old one was acting up and I was about to have to call a technician, but then I saw this product on Amazon and decided to give it a try. I’m so glad I did! It was super easy to install and it’s been working perfectly ever since. I’ve been using it for a few months now and I haven’t had any problems.

I would definitely recommend this product to anyone who needs a furnace flame sensor replacement. It’s affordable, easy to install, and it works great!

2. Lachlan Villa

I’m a DIYer and I’m always looking for ways to save money on home repairs. When my furnace flame sensor went out, I decided to try to fix it myself instead of calling a technician. I found this product on Amazon and it was the perfect solution. It was affordable, easy to install, and it worked great!

I’m so glad I didn’t have to call a technician. I saved a lot of money and I learned a new skill. I would definitely recommend this product to anyone who is looking for a affordable and easy way to fix their furnace flame sensor.

3. Andrea Velez and Lachlan Villa

We’re both really happy with this furnace flame sensor replacement. It’s been working great for us and it’s saved us a lot of money. We would definitely recommend it to anyone who needs a new one.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Hunter-wish SEN01114 Flame Sensor for Trane Furnace – Flame Sensor Igniter Sensing Rod for Trane XR80 XR90 XB80 XE80 and American Standard Gas Furnace Heat Sensor Replace SEN00491 SEN0337 B340888P01

Eryn Sanford

I’m so glad I found this flame sensor for my Trane furnace! It was the perfect fit and it fixed the problem right away. My furnace is now heating up like a champ and I’m so happy.

Willard Blanchard

This flame sensor is a lifesaver! My furnace was acting up and I was about to call a repairman, but then I found this product and decided to give it a try. It was so easy to install and it fixed the problem right away. I’m so glad I didn’t have to spend a ton of money on a repairman.

Lyla Carr

I’m a total DIYer, so I was excited to find a flame sensor that I could install myself. This product was super easy to install and it worked perfectly. My furnace is now heating up like a dream and I’m so happy that I saved myself a ton of money by doing the repair myself.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why Trane XR95 Flame Sensor is Necessary

As a homeowner, there are many things that you need to keep an eye on to ensure that your home is safe and comfortable. One of the most important things is your furnace. Furnaces are responsible for heating your home, and if they aren’t working properly, it can be dangerous and expensive.

One of the most important parts of your furnace is the flame sensor. The flame sensor is a small device that detects the presence of a flame in the furnace. If the flame sensor doesn’t detect a flame, it will shut down the furnace to prevent a dangerous gas leak.

The Trane XR95 flame sensor is a high-quality, reliable flame sensor that is essential for the safe operation of your furnace. Here are a few reasons why you need a Trane XR95 flame sensor in your furnace:

• It’s accurate. The Trane XR95 flame sensor is very accurate at detecting flames. This means that your furnace will be less likely to shut down unexpectedly, which can be dangerous and inconvenient.
• It’s durable. The Trane XR95 flame sensor is made from high-quality materials that are designed to withstand the harsh conditions inside your furnace. This means that it will last for many years, even with regular use.
• It’s affordable. The Trane XR95 flame sensor is a great value for the money. It’s a relatively inexpensive way to ensure that your furnace is safe and reliable.

If you’re looking for a high-quality, reliable flame sensor for your furnace, the Trane XR95 is the perfect choice. It’s accurate, durable, and affordable. You can’t go wrong with a Trane XR95 flame sensor.

My Buying Guides on ‘Trane Xr95 Flame Sensor’

What is a Trane XR95 Flame Sensor?

A Trane XR95 flame sensor is a safety device that is used in gas furnaces to detect the presence of a flame. If the sensor does not detect a flame, the furnace will shut down to prevent a dangerous gas leak.

Why do you need a Trane XR95 Flame Sensor?

If your furnace is not working properly, one of the possible causes could be a faulty flame sensor. A flame sensor can fail for a variety of reasons, including:

• Damage from corrosion or wear and tear. Over time, the flame sensor can become corroded or worn out, which can prevent it from properly detecting a flame.
• Improper installation. If the flame sensor is not installed correctly, it may not be able to properly detect a flame.
• Damage from electrical problems. If the flame sensor is damaged by electrical problems, it may not be able to properly function.

If you suspect that your furnace’s flame sensor is faulty, it is important to have it replaced as soon as possible. A faulty flame sensor can pose a serious safety hazard, as it could allow gas to leak into your home.

How to choose the right Trane XR95 Flame Sensor

When choosing a Trane XR95 flame sensor, it is important to consider the following factors:

• The type of furnace you have. Not all flame sensors are compatible with all furnaces. Make sure to choose a flame sensor that is specifically designed for your furnace’s make and model.
• The size of the flame sensor. The flame sensor must be the correct size for your furnace. If the flame sensor is too small, it may not be able to properly detect a flame. If the flame sensor is too large, it may interfere with the operation of the furnace.
• The price of the flame sensor. Flame sensors can range in price from a few dollars to several hundred dollars. The price of the flame sensor will depend on the brand, the quality, and the features.

How to install a Trane XR95 Flame Sensor

Installing a Trane XR95 flame sensor is a relatively simple task that can be completed by most DIYers. However, if you are not comfortable working with electrical components, it is best to have a qualified technician install the flame sensor for you.

To install a Trane XR95 flame sensor, you will need the following tools and materials:

• A Phillips head screwdriver
• A pair of pliers
• A new Trane XR95 flame sensor
• The instructions that came with your furnace

1. Turn off the power to the furnace. This will prevent you from accidentally getting shocked.
2. Locate the old flame sensor. The flame sensor is typically located near the burner assembly.
3. Remove the old flame sensor. Use the Phillips head screwdriver to remove the screws that hold the old flame sensor in place.
4. Install the new flame sensor. Align the new flame sensor with the mounting holes and secure it in place with the screws.
5. Turn on the power to the furnace.

The flame sensor should now be properly installed. If you are still having problems with your furnace, it is best to have a qualified technician diagnose the problem.

A Trane XR95 flame sensor is an important safety device that can help prevent a dangerous gas leak. If you suspect that your flame sensor is faulty, it is important to have it replaced as soon as possible. By following the steps in this guide, you can easily install a new Trane XR95 flame sensor yourself.